Unlike older controllers, the FC1178BC has a protection mechanism. If the NAND flash develops bad blocks or the file system is corrupted, the controller locks itself into a read-only or "dead" state. Standard Windows formatting fails. The involves shorting specific pins to reset the controller so the PC recognizes it long enough to flash new firmware.
If the MpTool doesn't see the drive, try a different USB port (preferably USB 2.0). You may also need to enter "Test Mode" by shorting two pins on the NAND chip, though this is for advanced users only. Fail Codes firstchip fc1178bc firmware hot
The phrase "firmware hot" is technician slang. In formal terms, it refers to or Hot Plug Firmware Injection . Unlike older controllers, the FC1178BC has a protection
If your drive is running "hot," it usually points to one of two things: The involves shorting specific pins to reset the
The FC1178BC is a small QFN-32 package. You need to short (pin 23 or 24) to Ground (pin 18 or 19). Alternatively, on many PCB designs, short the two holes of the LED (solder pads for the status light).