Acer Mcp73tad Motherboard Manual Verified |work| (1080p — 2K)

Deep Report: Acer MCP73TAD Motherboard 1. Executive Summary The MCP73TAD is an OEM (Original Equipment Manufacturer) motherboard designed primarily by Acer for use in specific desktop computer models, most notably the Acer Aspire M3641 and similar variations within the Aspire M series. It utilizes the NVIDIA MCP73 chipset architecture. Because it is an OEM board, it lacks a traditional retail manual (such as those provided by ASUS or Gigabyte for consumer boards). Instead, documentation is typically limited to the "User Guide" provided with the computer tower or service manuals found in Acer’s corporate service channels. This report aggregates verified specs and functional details.

2. Motherboard Identification

Manufacturer: Acer / Developed by Wistron (ODM). Model Number: MCP73TAD. Form Factor: Micro ATX (approximately 24.4 cm x 24.4 cm). Chipset: NVIDIA GeForce 7100 / nForce 630i (MCP73V single-chip architecture).

3. Detailed Technical Specifications A. Processor Support (CPU) The board supports Intel processors using the LGA 775 socket. acer mcp73tad motherboard manual verified

Socket: LGA 775 (Socket T). Supported CPU Families: Intel Core 2 Duo, Intel Core 2 Quad, Intel Pentium Dual-Core, Intel Celeron. FSB (Front Side Bus): 1333 MHz / 1066 MHz / 800 MHz. Note: As with many OEM boards, CPU support is dictated by the BIOS version. While the socket supports many chips, the factory BIOS may only recognize specific CPUs originally sold with the chassis (typically Core 2 Duo E4xxx/E6xxx series).

B. Memory (RAM) This board uses older DDR2 technology.

Type: DDR2 SDRAM. Slots: 2 x 240-pin DIMM slots. Capacity: Supports up to 4 GB total (2 GB per slot). Speed: PC2-5300 (667 MHz) or PC2-6400 (800 MHz). Dual Channel: Supported (slots should be populated in pairs for best performance). Deep Report: Acer MCP73TAD Motherboard 1

C. Integrated Graphics (IGPU) One of the defining features of the MCP73 chipset is the integrated NVIDIA graphics.

GPU: NVIDIA GeForce 7100 / nForce 630i. Video Memory: Shared system memory (TurboCache). Outputs:

1 x VGA (D-Sub). Note: Some variations of this board may include an HDMI port, but the base M3641 configuration typically relied on VGA. This distinguishes it from the later MCP7A boards which almost always included HDMI. Because it is an OEM board, it lacks

D. Expansion Slots Due to the Micro ATX form factor, expansion is limited.

PCI Express x16: 1 slot (For dedicated graphics card upgrades).