Mirror Clock Instructions — Dt-6507 Led

DT-6507 LED Mirror Clock is a sleek, multi-functional desktop device featuring a curved LED display, alarm with snooze, temperature sensor, and automatic night mode brightness. 1. Getting Started Power Supply : Connect the included USB cable to a 5V power adapter (not included) for a continuous display. Battery Backup 3 AAA batteries into the rear compartment to save your settings during power outages. Note: The display will turn off after 16 seconds on battery power alone to save energy; press to wake it : Attach the mounting foot to the bottom for stable placement on flat surfaces. 2. Setting the Time In time display mode, long press the MODE button for 3 seconds until the display flashes. UP or DOWN buttons to choose between again; the hour digits will flash. Use to adjust. once more to switch to minutes. Use to adjust. to confirm and finish. 3. Setting the Alarm & Snooze Electronic Watch DT-6507 User Manual

The DT-6507 LED mirror clock Go to product viewer dialog for this item. is a multi-functional digital alarm clock featuring a modern curved design, temperature display, and date functions . It can be powered via a USB cable or 3 AAA batteries ; when using batteries, the clock enters an energy-saving mode where the light is not always on . Time and Date Settings To enter setting mode, ensure you are on the main time display . Set Time : Press and hold the MODE button for about 3 seconds until the 12/24H format flashes . Use UP or DOWN to select your preferred format, then press MODE to confirm . When the Hour flashes, use UP or DOWN to adjust. Press MODE again . When the Minute flashes, use UP or DOWN to adjust. Press MODE to finish . Set Date : Press MODE once to switch to the Date display . Press and hold the MODE button until the year flashes . Adjust the Year , Month , and Date using the UP/DOWN buttons, pressing MODE to confirm each step . Alarm and Snooze Settings Set Alarm : Press and hold the ALARM button until the hour flashes . Adjust the Hour and Minute using the UP/DOWN buttons . Press ALARM again to set the Snooze interval (default is 5 minutes, adjustable from 5–60 minutes) . Select the Alarm Frequency : 1-5 : Monday to Friday . 1-6 : Monday to Saturday . 1-7 : Monday to Sunday . Activate/Deactivate : In normal mode, press DOWN to toggle the alarm on or off. An "AL" icon will appear when active . Snooze : When the alarm sounds, press the SNZ/LIGHT button to pause it for the set interval . Display and Temperature Functions Brightness Control : In normal time mode, press the UP button to switch between brightness levels (typically L1, L2, and L3) . Night Mode (Dimmer) : The clock can automatically dim during set hours (default is 18:00 to 06:00) . To enable, press MODE three times until "OFF" or "ON" appears, select "ON" with UP/DOWN , and hold MODE to set the start and end times . Temperature : Press MODE twice to see the temperature. You can often toggle between Celsius (°C) and Fahrenheit (°F) by pressing the UP button while in temperature mode . Display Modes : Press MODE to cycle between Time, Date, and Temperature . INSTRUCTION MANUAL

Setting up your DT-6507 LED mirror clock is straightforward once you know the button combinations. The clock features five main buttons: MODE , ALARM , SNZ/LIGHT , UP , and DOWN . Time & Date Settings To configure the basic display settings, use the MODE button: Set Time : Press and hold MODE until the 12/24-hour format flashes. Use UP/DOWN to choose your preference, then press MODE to move to hours and again for minutes, adjusting each with the UP/DOWN buttons. Set Date : Briefly press MODE to enter date mode (displays Month/Date). Press and hold MODE until the year flashes, then use UP/DOWN to adjust. Press MODE again to set the month and day in the same manner. Temperature : Press MODE twice to see the temperature. Use the DOWN button to switch between Celsius and Fahrenheit. Alarm & Snooze Configuration Setting the Alarm : Press and hold ALARM until the hour flashes. Adjust with UP/DOWN , then press ALARM again to set minutes. Snooze Interval : After setting the minutes, press ALARM once more to set the snooze duration (default is 5 minutes). Alarm Schedule : You can set the alarm to sound for specific days: 1-5 (Mon–Fri), 1-6 (Mon–Sat), or 1-7 (Mon–Sun). Activate/Deactivate : A short press of the ALARM button in normal mode toggles the alarm on or off; look for the "AL" icon on the display. Display & Night Mode Brightness : In normal mode, press UP to toggle between brightness levels. Auto-Cycle Display : To have the clock rotate between time, date, and temperature, go to temperature mode and hold MODE until you hear a beep. Power Management USB Power : Recommended for a continuous display . The screen remains on at all times when plugged into a 5V USB source. Battery Mode : Using 3x AAA batteries acts as a backup for your settings. In battery mode, the display will automatically turn off after roughly 16 seconds to save energy; press SNZ/LIGHT to wake it up. For a visual walkthrough of these settings, including unboxing and button functions, watch this setup guide:

Arthur squinted at the说明书, his breath fogging the bathroom mirror. The device in his hands—a sleek, round panel called the DT-6507—was supposed to be a clock. But it didn't look like one. It looked like a polished black stone, dead and heavy. “Step one: Remove protective film,” he read aloud. He peeled it off. The surface was now a perfect, dark mirror. His tired 2:00 AM face stared back. “Step two: Connect to 5V USB power source.” He plugged it into the shaver socket. Nothing happened. The mirror showed only his reflection, trapped under the bathroom’s harsh light. “Step three: Locate the capacitive touch sensor on the lower rim.” His thumb brushed the bottom edge. The mirror woke up . Red digits blazed through the glass like a wound: 12:00 . But that wasn’t the strange part. The strange part was the reflection. In the mirror, behind his own shoulder, a dark shape was also looking at the clock. It was tall. Featureless. And it had no thumb on the sensor. Arthur jerked his head around. The bathroom was empty. He looked back at the mirror. The shape was gone. Just his own pale face. “Faulty wiring,” he whispered. “Chinese junk.” He turned to step four: “Set time by holding SET button for 3 seconds.” He did. The digits blinked. He tapped the + button. 12:01 . In the mirror’s reflection, the clock showed 12:01 too. But behind his hand, the dark shape’s hand was moving. It was tapping the – button. The clock flickered. 11:59 . Then 11:58 . Arthur’s thumb wasn’t on the minus. He tried to let go of the clock, but his fingers were stuck to the cold glass rim. The mirror’s surface rippled, not like water, but like a screen changing input. The red digits began to count down on their own. 11:55… 11:50… The shape in the reflection stepped closer. It raised a long, gray hand and pointed at the final line of the instructions, the one Arthur had ignored: “Note: DT-6507 is a countdown mirror. When it reaches 00:00, the reflection is released. You become the standby image.” Arthur screamed. But the bathroom mirror showed no mouth. Just red numbers, falling like a pulse. 11:40… 11:20… And in the glass, the dark shape smiled with Arthur’s face. dt-6507 led mirror clock instructions

The DT-6507 LED Mirror Clock Go to product viewer dialog for this item. is a versatile digital timepiece that combines a modern aesthetic with functional features like temperature display, night mode, and dual power options. Setting it up requires navigating a simple "long-press" and "short-press" system using the buttons on the back or top. 1. Powering the Clock You can power the device in two ways: USB Cable (Recommended): Plug the provided cable into a 5V power source. This keeps the LED display on permanently. Batteries: Insert 3 AAA batteries. Note that in battery mode, the display will automatically turn off after 16 seconds to save power; you must press any button to wake it up. 2. Setting the Time Enter Setting Mode: Long-press the MODE button for about 3 seconds until the hour digits start flashing. Adjust Hours: Use the UP or DOWN buttons to reach the current hour. Pay attention to the "PM" indicator if using 12-hour format. Adjust Minutes: Short-press MODE again; the minute digits will flash. Use UP or DOWN to adjust. Confirm: Short-press MODE one last time to save your settings. 3. Setting the Date Short-press MODE until the display shows a date (e.g., 101 for Jan 1st). Long-press MODE until the year flashes. Use UP/DOWN to set the year. Short-press MODE to flash the month, adjust, and short-press again to set the day. Press MODE to finish. 4. Alarm Setup and Snooze Set Time: Long-press the ALARM button until the hour flashes. Use UP/DOWN to set the time, then short-press ALARM to set the minutes. Set Snooze: After minutes, the display shows "05" (default snooze time). Use UP/DOWN to change this (5–60 minutes). Activate Alarm: Short-press the ALARM button once. An "AL" or bell icon will appear on the screen, indicating the alarm is active. Snooze/Stop: When it rings, press SNZ/LIGHT for a snooze or any other button to stop it for the day. 5. Display Customization 12/24 Hour Format: In time mode, press UP to toggle between 12H and 24H formats. Temperature: Press MODE until you see the temperature. Press DOWN to switch between Celsius (°C) and Fahrenheit (°F). Brightness: Press UP while in time mode to toggle between two brightness levels (Bright/Dim). Night Mode: Short-press MODE until "OFF" or "ON" appears under a moon icon. Long-press MODE here to set a custom timeframe (e.g., 18:00 to 06:00) during which the clock will automatically dim.

To set the time on your DT-6507 LED Mirror Clock Go to product viewer dialog for this item. , press and hold the MODE button for 3 seconds until the display flashes, then use the UP and DOWN buttons to adjust the values .   Quick Setup Guide   Time Setting : Hold MODE for 3 seconds until "12H" or "24H" flashes. Use UP/DOWN to select the format and press MODE to confirm. When the hour flashes, adjust with UP/DOWN , then press MODE . When the minutes flash, adjust and press MODE to finish. Alarm Setting : Hold ALARM for 3 seconds. Adjust hours and minutes using UP/DOWN , pressing ALARM to move between them. Set the Snooze duration (0–60 mins) and the alarm frequency: 1-5 (Mon–Fri), 1-6 (Mon–Sat), or 1-7 (Every day). Briefly press ALARM to toggle the alarm ON or OFF (an "AL" icon indicates it's active). Brightness & Display : Manual Brightness : Press UP to switch between bright and dim modes. Night Mode : Press MODE three times until "OFF" or "ON" appears. Use UP/DOWN to select "ON" for automatic dimming from 18:00 to 06:00. Display Toggle : Press MODE to cycle through Time → Date → Temperature. Loop Mode : In temperature mode, hold MODE until you hear a beep to cycle all displays automatically.   Power Information   USB Power : The display stays on continuously when plugged in via USB. Battery Power (3x AAA) : The screen will turn off after 16 seconds to save energy. Press SNZ/LIGHT or make a loud sound/tap to wake it up.   Feature   Key Control Snooze Press SNZ/LIGHT when alarm sounds Default is 5 minutes Temp Unit Press MODE (twice) → DOWN Switch between °C and °F Turn Off Screen Hold SNZ/LIGHT for 3 seconds Useful for sleeping at night For further visual guidance, you can refer to instructional videos from YouTube creators or check technical details on mobilradio.ru .   INSTRUCTION MANUAL

Setting up the DT-6507 LED Mirror Clock is simple once you know the specific button sequences. This clock typically features five main controls: MODE , ALARM , SNZ/LIGHT , UP , and DOWN . Time and Date Setup Enter Setting Mode : Press and hold the MODE button for about 3 seconds until the display begins to flash. Select Time Format : Use the UP or DOWN buttons to choose between 12H and 24H formats. Press MODE once to confirm. Adjust Hours and Minutes : The hour digit will flash. Use UP/DOWN to set the correct hour. Press MODE . The minute digits will flash. Use UP/DOWN to set the correct minutes. Press MODE . Set Date : Continue pressing MODE to cycle through the Year , Month , and Date , using UP/DOWN to adjust each value as they flash. Save and Exit : Either press MODE one final time or wait a few seconds for the display to stop flashing and save automatically. Alarm and Snooze Settings Set the Alarm : Press and hold the ALARM button until the hour flashes. Adjust the time using UP/DOWN , then press ALARM again to set minutes. Snooze Interval : After setting the alarm time, you can often adjust the snooze duration (default is 5 minutes) and choose the alarm period: 1-5 (Mon–Fri), 1-6 (Mon–Sat), or 1-7 (Mon–Sun). Activate/Deactivate : A short press of the ALARM button will toggle the alarm on or off. Look for an " AL " or bell icon on the screen to confirm it is active. To Snooze : When the alarm rings, press the SNZ/LIGHT button on top to pause it for the set interval. Display and Brightness Digital clock electronic alarm led thermometer - verk.store DT-6507 LED Mirror Clock is a sleek, multi-functional

DT-6507 LED Mirror Clock — Instructions Product overview The DT-6507 is an LED mirror clock that combines a reflective surface with a bright digital time display. It shows hours and minutes; some models also display seconds, AM/PM, date, and temperature. Power is supplied via the included USB cable; an internal battery (if present) preserves settings during brief power interruptions but does not run the display continuously. What's in the box

DT-6507 LED mirror clock USB power cable (type depends on model) Wall-mount bracket and screws OR adhesive pads (model-dependent) Quick-start guide / warranty card

Safety

Use only the supplied cable or a compatible 5V USB power source. Do not expose the clock to water or high humidity. Keep away from heat sources and direct sunlight to avoid damage to the mirror finish and electronics. Do not open the case; no user-serviceable parts inside.

Setup