In the world of material science and polymer testing, consistency is king. If you test a plastic sample immediately after pulling it out of a cold warehouse, you will get vastly different results than if you test that same sample after it has sat in a warm, humid laboratory for three days.
ASTM D618 defines several specific procedures labeled by letters. The choice of procedure depends on the material type and the final test to be performed: Environment Typical Duration Standard Lab Atmosphere (23°C, 50% RH) Min. 40 hours Procedure B Oven conditioning at 50°C Procedure C Immersion in distilled water (23°C) Procedure D High humidity (96% RH at 23°C) Procedure E High temperature water immersion (50°C) Standard Lab Atmosphere astm d618-21 pdf
Services like IHS Markit or Accuris provide enterprise-level access. In the world of material science and polymer
The standard, titled "Standard Practice for Conditioning Plastics for Testing," defines the procedures for conditioning plastic materials to ensure reproducible test results. Because temperature and humidity significantly affect the physical and electrical properties of plastics, this standard provides a consistent baseline for material comparisons across different laboratories. Key Conditioning Procedures The choice of procedure depends on the material