The tool should detect the device and start the flashing process.
Click on and select the scatter file from your extracted TA-1070 firmware folder. Connecting the Device: Power off the Nokia TA-1070 completely. In the UMT tool, click the Flash button. nokia ta1070 flash file umt full
To flash the using Ultimate Multi Tool (UMT) , you must use the UMT MTK module, as this device runs on a MediaTek chipset. This process is commonly used to fix "Hang on Logo" or boot loop issues. Prerequisites Flash File : Ensure you have the official stock firmware for Nokia 3.1 (TA-1070) . These files are typically available in scatter format . The tool should detect the device and start
Nokia_TA1070_UMT/ ├── [0] preloader_wombat.bin (Bootrom first stage) ├── [1] pgpt.img (Partition Table) ├── [2] proinfo.img (IMEI & Serial data) ├── [3] nvram.img (WiFi/BT MAC + Calibration) ├── [4] protect1 & protect2 (Factory reset protection data) ├── [5] boot.img (Kernel) ├── [6] system.img (Android OS - Largest file) ├── [7] vendor.img ├── [8] userdata.img (Factory reset clean slate) └── MT6761_Android_scatter.txt In the UMT tool, click the Flash button
If you have the UMT dongle and the correct firmware, here is the general workflow (UMT v2 or v3 software):