Grease Datasheet Extra Quality Extra Quality: Shell Alvania R3

: Fortified with additives to resist the formation of deposits and maintain consistency under vibration. Corrosion Resistance

Note: This is NOT an NSF H1 food-grade grease. For food processing, refer to Shell Gadus S2 V220 series.

Its stiffness prevents it from migrating downwards in vertical bearing arrangements. shell alvania r3 grease datasheet extra quality

The grease is fortified with anti-rust and anti-corrosion additives, ensuring reliable protection in hostile or moist environments.

Note: Extra Quality batches maintain a stable consistency up to 110°C, whereas standard grades may begin softening at 100°C. : Fortified with additives to resist the formation

The following data reflects the typical physical characteristics for the R3 (NLGI 3) grade: Typical Value NLGI Consistency Lithium Hydroxystearate Base Oil Type Mineral Oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Cone Penetration (Worked @ 25°C) 220–250 (0.1 mm) Dropping Point Operating Temperature Range -30°C to +130°C Key Performance Features Reliable High-Temperature Performance:

: Often used in applications where re-greasing is infrequent. Water Pump Bearings : Performs reliably in the presence of water. Shell Iraq Safety and Handling Shell Alvania R3 Its stiffness prevents it from migrating downwards in

Highly recommended for bearings in electric motors where a Grade 3 consistency is required.